Basic connection with hd cable box, Basic connection with sd cable box, Hd bravia® sync™ basic connection – Sony KDL-50R550A User Manual
Page 2: Built-in wireless lan connection and setup, Required cable types for connection, Connecting a pc to your bravia® tv
Basic Connection with HD Cable Box
Rear of TV
Cable/
Antenna
SAT (dish)
Splitter
HD Cable Box
or HD Satellite Receiver
Home Theater System
A/V Receiver
Blu-ray Disc/DVD
Basic Connection with SD Cable Box
HD Antenna
Rear of TV
A/V Receiver
Home Theater System
Blu-ray Disc/DVD
Cable/SAT (dish)
SD Cable Box or
SD Satellite Receiver
yellow
plug to
VIDEO IN
HD BRAVIA® Sync™ Basic Connection
Rear of TV
Side Panel
SAT (dish)
Cable/Antenna
Splitter
HD Cable Box or
HD Satellite Receiver
*
1
A/V Receiver
*
1
Blu-ray Disc
*
1
MHL Device
*
2
Built-in Wireless LAN Connection and Setup
Required Cable Types for Connection
HDMI
Composite
Audio (L/R)
Component
Mini-Pin-to-Audio (L/R)
MHL
Coaxial
Digital Optical Audio
Notes on Connection:
Your TV is equipped with multiple HDMI inputs; connect your incoming signal
source (HD Cable Box, HD Satellite Box, or DVD) with HDMI/MHL or
component video for the best possible picture quality.
Connecting a PC to Your BRAVIA® TV
Press PC’s FUNCTION Key + Select Output to transmit to TV.
Refer to your BRAVIA® Operating Instructions Manual for more information.
■
■
■
*
1
Signifies a BRAVIA Sync capable device.
*
2
The optical connection is only needed for A/V receivers that do not support ARC
(Audio Return Channel).
Modem
Wireless router
(access point)
Internet
TV
Wireless Network can be set during
initial setup.
Wireless Setup security type differs
depending on the wireless router
(access point) used.
Follow the chart below and select
the appropriate menu.
Security type of your Wireless router (access point)
WPS (*
1
)
PIN Code
WPS (*
1
)
Push Button
SSID with Security
Key (WEP/WPA (*
2
))
SSID without
Security Key
Select
WPS (PIN)
Select
WPS (Push
Button)
Select
Scan, then select
a network from
the list (*
3
)
Select
Scan, then select
a network from
the list (*
3
)
*
1
Wi-Fi Protected Setup ™ (WPS) is a mark of the Wi-Fi Alliance.
*
2
Wi-Fi Protected Access ™ (WPA) is a mark of the Wi-Fi Alliance.
*
3
Before scanning, be sure to make the wireless router (access point) settings
(SSID/Key).