Sony HDR-TD10 - Manual (Page 86)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
USB Connect Setting
You can set the USB transfer mode for
connecting the camcorder to a computer or
other USB device.
 Auto
The camcorder automatically selects the USB
transfer mode depending on the connected
device.
Mass Storage
This is a USB transfer mode compatible with
many types of USB devices.
MTP
This is a USB transfer mode compatible with
certain types of computers.
Notes
When you connect the camcorder to other
devices using the [MTP] mode, movies that
have been recorded with the same image quality
as the one currently selected (selected with
the [ / Setting] menu) can only be
displayed on the connected device.
When the camcorder is connected to an
external device in the [MTP] mode, movie
files will be displayed with the recorded
date, however, some information, such as
area information, included in the movie files
cannot be displayed on the connected device.
To import images from the camcorder to your
computer, use the supplied “PMB” software.
If the “Device Stage * ” window does not open
when you connect the camcorder to a computer
equipped with Windows 7, set [USB Connect
Setting] to [Auto].
* “Device Stage” is a menu of Windows 7, that is
used to manage devices (camcorder, camera,
etc.) that are connected to the computer.
Disc Burn
See page 54.




Beep
 On
A melody sounds when you start/stop
recording, or operate the touch panel.
Off
Cancels the melody.
LCD Brightness
You can adjust the brightness of the LCD
screen.
 Normal
Normal setting (normal brightness).
Bright
Select this when the LCD screen is not bright
enough.
Tips
This adjustment does not affect the recorded
images in any way.
REC Lamp (Recording
lamp)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.

