Sony HDR-TD10 - Manual (Page 97)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
(Warning indicator pertaining to the
external media device)
The image database file may be damaged.
Check the database file by touching
(MENU)  [Setup]  [ ( Media
Settings)]  [Repair Img. DB F.]  the
recording medium.
The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.
(Warning indicator pertaining to the flash)
There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [ REC Mode] is set to [Highest
Quality ] or [60p Quality ], you cannot
capture photos while recording movies.
Furthermore, if [ Frame Rate] is set to
[24p], you cannot record photos while the
camcorder is in movie recording standby
mode.
Tips
You may hear a melody when some warning
indicators appear on the screen.












Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
Cannot recognize the internal memory.
Format and use again.
The internal recording medium of the
camcorder is set differently from the default
format. Performing [Format] (p. 82) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.
Data error.
An error occurred during reading or writing
the internal recording media of the camcorder.
This may occur when you keep applying shock
on the camcorder.
Movies recorded on other devices may not be
played back.
Inconsistencies found in image database
file. Do you want to repair the image
database file?
Inconsistencies found in image database
file. Cannot record or play HD movies. Do
you want to repair the image database
file?
You cannot record or play back movies
because no movie management information
exists. If you touch , new management
information is created and you can record or
play back movies.
Inconsistencies found in the image
database file. Back up and recover.
Recover, then import using the included
PC software.
Since the database information of high
definition image quality (HD) movies has
been damaged, there are inconsistencies





