Sony DSC-W100 - Manual (Page 24)

24
Changing the screen display
Each time you press the (Screen display
switch) button, the display changes as
follows.
• By pressing (Screen display switch) button
longer, you can brighten the LCD backlight.
t step 5 in “Read This First”
• When you set the histogram display to on,
image information is displayed during playback.
• The histogram does not appear in the following
situations:
While shooting
– When the menu is displayed.
– When recording movies
During playback
– When the menu is displayed.
– In index mode
– When you are using playback zoom.
– When you are rotating still images.
– During playback of movies
• During image playback, you cannot turn the
LCD screen off.
• A large difference in the histogram displayed
when shooting and during playback may occur
when:
– The flash strobes.
– The shutter speed is slow or high.
• The histogram may not appear for images
recorded using other cameras.
• When you set the LCD screen to off, the digital
zoom does not function (page 49) and [AF
Mode] is set to [Single] (page 49). When you
select (flash mode)/
(self-timer)/
(macro), the image is displayed for about
two seconds.
Histogram display
LCD screen off
Histogram on
Indicators off
Indicators on
z Using a histogram
A histogram is a graph showing the brightness of
an image. Press
(Screen display switch)
repeatedly to display the histogram inside the
screen. The graph display indicates a bright image
when skewed to the right side, and a dark image
when skewed to the left side. Set the mode dial to
, , or Scene Selection, then adjust the
exposure while checking it with the histogram
(
t step 5 in “Read This First”).
A Number of pixels
B Brightness
• The histogram also appears when the mode dial is set to M or when playing back a single image, but you
cannot adjust the exposure.
Bright Dark
A
B