Sony PCG-FX220K - Manual (Page 27)

Using Smart Connect
27
To remove the weight saver
1 There is a release lever on the bottom of the weight saver. To remove the
weight saver, slide this lever in the direction of arrow 1, then slide the
Release lever on the bottom of the notebook in the direction of arrow 2.
2 After removing the weight saver, pull out the weight saver’s hinged arm and
fold it into the weight saver.
Using Smart Connect
Windows Me™
You can connect your VAIO
®
Notebook to another VAIO computer that has the
preinstalled Windows Me operating system or the Sony Smart Connect 3.0
software preinstalled. You may use an optional i.LINK
®*
cable to connect the
two systems and then use one computer to edit, copy, or delete files on the other
Multipurpose bay release levers
* i.LINK is a Sony trademark used only to designate that a product contains an IEEE 1394 con-
nection. The i.LINK connection may vary, depending on the software applications, operating
system, and compatible i.LINK devices. All products with an i.LINK connection may not
communicate with each other. Refer to the documentation that came with your compatible
i.LINK device for information on operating conditions and proper connection. Before con-
necting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
Arrow 1: Weight saver Release lever
Arrow 2: RELEASE lever