Sony PEG-N760C - Manual (Page 55)

55
Setting up your Sony CLIÉ Handheld – Advanced
Chapter 3
8
Click the file name(s) to select the file(s), then click the
arrow ( >> or << ) button to change their destination
(Handheld or Memory Stick).
Sony recommends you select Handheld as the destination. If you
select Memory Stick as the destination, data may not be displayed
for some applications.
9
Click OK.
10
Click Done.
11
Perform a HotSync operation.
The application(s) you selected in step 6 will be installed on your
CLIÉ handheld or the Memory Stick media. See page 35 (Step 6:
Performing a HotSync
® operation for the first time) for details on a
local HotSync operation.
Note
When installing add-on applications to the Memory Stick media, be sure to
perform the HotSync operation with the Memory Stick media inserted in
your CLIÉ handheld.
To access the Install Tool dialog box
Do either of the following to display the Install Tool dialog box
immediately:
1
Click Start on the taskbar, point to Programs, Sony
Handheld, and then click Install Tool.
2
Double-click any file with a PRC, or PDB file extension.
If you selected Memory Stick in step 8
With some applications, your CLIÉ handheld may not be able to
display data if you installed the application in the Memory Stick
media.
This is because the Palm Desktop for CLIÉ software installs application
data in the /PALM/Launcher directory when Memory Stick is selected
in step 8. As a result, some application data cannot be started through
normal process.
If the application you installed in the Memory Stick media fail to start,
copy the data again, this time to your CLIÉ handheld. For details, see
“Copying data in Memory Stick media to your CLIÉ handheld” in the
Operating Instructions manual.