Sony KE-32TS2 - Manual (Page 23)

(US)
23
Watching the TV
US
MUTING POWER
VCR/DVD SAT/CABLE
VCR/DVD
SLEEP
JUMP
VOL CH
ENTER
MTS/SAP
GUIDE TV/SAT
SAT/CABLE
WIDE MODE DISPLAY
FUNCTION
TV
SYSTEM
OFF
FAVORITES
MENU
CODE SET
1 2 3
4 5 6
7 8
0
9
TV/VIDEO
PICTURE
MODE
POWER
SAVING
TV
MUTING
DISPLAY
SYSTEM OFF
1
2
Watching the TV
2
3
Watching the TV
JUMP
POWER
TV
1 2 3
4 5 6
7 8
0
9
ENTER
CH
VOL
or
STANDBY/
SLEEP
1
Press POWER on the remote.
Tip
When the STANDBY/SLEEP indicator goes off, press
POWER on the TV.
2
Select the desired channel using the 0-9 and
ENTER buttons.
Press 0-9 to select a channel, the channel
changes after 2 seconds. Press ENTER to select
immediately.
Use the CH +/– buttons to scan through the
channels.
Tip
When you press and hold CH + or – the channel number
will change rapidly.
3
Adjust the volume using the VOL +/– buttons.
Other button operations
Press To
MUTING
SYSTEM OFF
DISPLAY
JUMP
Tips
• While the STANDBY/SLEEP indicator is lit, the TV turns on
automatically if you press the 0-9 and ENTER buttons or CH
+/– buttons on the remote.
• You can adjust the volume by referring to the value beside the
volume indication (on screen).
mute the sound. Press again or press
VOL + to restore sound.
turn off the TV and all other Sony
equipment.
display the current channel number.
Press again to turn display off.
The channel display will automatically
disappear after a few minutes.
To display the channel again, press
again.
jump back and forth between two
channels. The TV alternates between the
current channel and the last channel
selected using the 0-9 buttons.
(Continued)