Sony HCD-DX150 - Manual (Page 31)

Pla
y
ing D
iscs
31 GB
“RESUME” appears in the front panel
display, so you can restart the disc from the
point where you stopped the disc.
If “RESUME” does not appear, Resume
Play is not available.
2
Press H .
The system starts playback from the point
where you stopped the disc in Step 1.
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 75), the resume point is cleared
when you change the function by pressing
FUNCTION.
• The point where you stopped playing may be cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, CDs, and DATA CDs,
the system remembers the resume playback point for
the current disc.
The resume point is cleared when:
– you opened the disc tray.
– you disconnect the AC power cord (mains lead).
– the system enters standby mode (DATA CD only).
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work with some discs.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• To play from the beginning of the disc, press x twice,
then press H.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped
the disc for up to 40 discs and resumes playback
the next time you insert the same disc. If you
store a resume playback point for the 41st disc,
the resume playback point for the first disc is
deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)” (page 75).
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [ON] (page 75) and you playback a recorded
disc such as DVD-RW, the system may playback
other recorded discs from the same resume point. To
play from the beginning, press x twice and then press
H.
Creating your own program
(Program Play)
(VIDEO CD, CD only)
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
• You can program the track on the current disc only.
1
Press DISPLAY.
The Control Menu appears.
2
Press X / x to select
[PROGRAM], then press ENTER.
The options for [PROGRAM] appear.
3
Press X / x to select [SET
t
], then
press ENTER.
4
Press c .
Note
Tip
Note
Note
PLAY 6 (14)
T 2 : 5 0
OFF
SET
ON
OFF
CD
PROGRAM
1. TRACK
ALL CLEAR
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
T
0:00:00
– –
01
02
03
04
05
[TRACK] is displayed when you play a
VIDEO CD or CD.
Tracks recorded
on a disc Total time of the
programmed tracks
continued