Sony NW-HD5 - Manual (Page 66)

 Playing Back Music
 Additional information
Troubleshooting
Sound
Symptom Case and/or corrective action
There is no sound.
Noise is heard.
 The volume level is set to zero. Turn the
volume up ( page 30).
 The headphone plug is not connected properly.
Connect it to
(headphones)/LINE OUT jack
securely ( page 29).
 The headphone plug is dirty. Clean the
headphone plug with a soft dry cloth.
 No audio data is stored in the hard disk.
The volume does not
increase
 “AVLS” is set to “AVLS On.” Set it to “AVLS
Off” (  page 53 ).
There is no sound
from the right channel
of the headphones.
 The headphone plug is not connected properly.
Connect it to
(headphones)/LINE OU
T jack
securely (  page 29 ).
The volume cannot be
adjusted.
 “Audio Out” is set to “Line Out.” Adjust the
volume using the volume control on the
connected device, or set “Audio Out” to
“Headphone” (
 page 53 ).
When using the player
with a stereo system
connected, the sound
is distorted or noisy.
 “Audio Out” is set to “Headphone.” Set it to
“Line Out” (  page 53 ).
Continued 
66
GB
NW-HD5.GB.2-629-002-21(1)
Table of Contents
Index