Sony PCG-F630 - Manual (Page 29)

Notebook User Guide 14
To remove the battery pack
1. Open the cover of the battery bay.
2. Pull out the battery pack.
3. Close the cover of the battery bay.
Notes on Batteries
❑
Never leave the battery pack in temperatures above 140 ° F (60 ° C), such
as under direct sunlight or in a car parked in the sun.
If the battery level falls below 10% (both the battery indicator and power indicators
will blink), you should either attach the AC adapter to recharge the battery or shut
down your computer and insert a fully charged battery.
When the computer is directly connected to AC power and has a battery pack in the
battery bay, it uses power from the AC outlet.
Keep the battery pack in the computer while it is directly connected to AC power. The
battery pack continues to charge while you are using the computer.
The battery pack supplied with your computer is a lithium-ion battery and can be
recharged at any time. Charging a partially discharged battery does not affect battery
life.
The battery indicator light is on while you use the battery pack as a power source.
When battery life is nearly depleted, the battery indicator starts flashing.
Your computer may not enter Hibernation mode when the battery life is low if certain
software applications are active or if certain peripheral devices are attached. To avoid
loss of data when using battery power, you should save your data frequently and
manually activate a power-management mode, such as Standby or Hibernation.
You may lose data if you remove the battery pack while the computer is on and not
connected to the AC adapter or if you remove the battery while the computer is in
Standby mode.