Ultra Start 007 - Manual (Page 6)

6. Timer Mode
Page 6
How to Set the Timer
00 00 00
00:00 00:00 6:00
RESET MODE
2 seconds
ST.STP ST.STP
TMR TMR TMR
00 58 00
00:20 00:18 0:00
RESET ST.STP
TMR TMR TMR
1. In real time mode, press the MODE button 3 times to enter Timer Mode.
2. Press the ST.STP button to start the timer. To stop, press the ST.STP again.
If the timer is stopped, press RESET to reset the time to the present value.
When the timer is running, the TMR Icon flashes in all other modes with the
exception of setting modes.
3. Press the MODE button to exit.
1. In real time mode, press the MODE button to enter the Timer Mode.
2. Hold the MODE button for 2 seconds, the hour digits will begin flashing.
3. While the hour digits are flashing press the ST.STP button to increase the
number. Hold the ST.STP button to increase the number at a greater speed.
4. Press RESET to go to the next field, minute and seconds will begin flashing.
5. After you have set the minute and seconds , press the MODE button to save
and exit