Sony DVP-FX811K - Manual (Page 15)

D:\2008_A\FFeiyu_2008_0218_Foxconn\3294108111\3294108111DVPFX811K
FX811\US\01US05PLY1-CEK.fm master page=right
15
Playing Discs
DVP-FX811K/FX811
3-294-108-31(1)
Playing Discs
Playing Discs
Depending on the DVD, some operations
may be different or restricted.
Refer to the operating instructions supplied
with the disc.
Connect the AC adaptor or install the battery
pack.
1
Open the player’s LCD panel.
Set the LINE SELECT switch on the
player’s right side to “OUT.”
2
Press [/1 on the remote or slide
the [/1/HOLD switch of the player
to “[/1.”
The player turns on and the power
indicator lights up in green.
3
Press OPEN to open the disc lid.
4
Insert the disc to be played.
Push with the playback side down until it
clicks.
5
Push the PUSH CLOSE on the
player to shut the disc lid.
6
Press H.
Playback starts.
• Some discs may start playing
automatically after the disc lid is shut.
• Depending on the disc, a menu may
appear on the screen. See page 17 for
details.
• After all titles have been played, the
player will stop itself and the display
will return to the menu screen.
Notes
• If the disc is inserted with playback side up, a “No
Disc” or “Cannot play this disc.” message
appears.
• Discs created on DVD recorders must be correctly
finalized to play on this player. For more
information about finalizing, refer to the
operating instructions supplied with the DVD
recorder.
• The disc may be still spinning when the disc lid is
opened. Wait until the spinning stops before
removing the disc.
VOL DISPLAY MENU RETURN OPTIONS
CHARGE POWER
HO LD
OP EN
CHARGE
PO WER
x
H
OPEN \/1/HOLD
1 2 3
4 5 6
7 8
0
9
\/1
H
x
Playback side facing down
,continued
01US01COV.book Page 15 Wednesday, February 20, 2008 11:34 AM