Warning – Sony DVP-FX811K User Manual

Page 2

Advertising
background image

D:\2008_A\FFeiyu_2008_0218_Foxconn\3294108111\3294108111DVPFX811K
FX811\US\01US02WAR-CEK.fm

master page=left

2

DVP-FX811K/FX811

3-294-108-31(1)

WARNING

To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
personnel only.
The AC power cord must be
changed only at a qualified
service shop.
Batteries or batteries
installed apparatus shall not
be exposed to excessive heat
such as sunshine, fire or the
like.

CAUTION

The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this CD/DVD player is harmful to
eyes, do not attempt to disassemble
the cabinet.
Refer servicing to qualified
personnel only.

This label is located on the bottom
of the unit.

This symbol is
intended to alert the
user to the presence
of uninsulated
“dangerous voltage”

within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

This symbol is
intended to alert the
user to the presence
of important
operating and

maintenance (servicing)
instructions in the literature
accompanying the appliance.

Precautions
• Install this system so that the AC

power cord can be unplugged
from the wall socket
immediately in the event of
trouble.

• The player is not disconnected

from the AC power source as
long as it is connected to the wall
outlet, even if the player itself
has been turned off.

• To prevent fire or shock hazard,

do not place objects filled with
liquids, such as vases, on the
apparatus.

For customers in the U.S.A
Owner’s Record

The model and serial numbers are
located at the bottom of the unit.
Record the serial number in the space
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this product.
Model No. DVP-FX811K/FX811

Serial No._____________

_

CAUTION

You are cautioned that any change
or modifications not expressly
approved in this manual could void
your authority to operate this
equipment.

Note

This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses, and can
radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the

receiving antenna.

– Increase the separation between

the equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from
that to which the receiver is
connected.

– Consult the dealer or an

experienced radio/TV technician
for help.

IMPORTANT SAFETY
INSTRUCTIONS

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus

near water.

6) Clean only with dry cloth.
7) Do not block any ventilation

openings. Install in
accordance with the
manufacturer’s instructions.

8) Do not install near any heat

sources such as radiators,
heat registers, stoves, or
other apparatus (including
amplifiers) that produce
heat.

9) Do not defeat the safety

purpose of the polarized or
grounding-type plug. A
polarized plug has two
blades with one wider than
the other. A grounding type
plug has two blades and a
third grounding prong. The
wide blade or the third prong
are provided for your safety.
If the provided plug does not
fit into your outlet, consult
an electrician for
replacement of the obsolete
outlet.

10) Protect the power cord from

being walked on or pinched
particularly at plugs,
convenience receptacles,
and the point where they exit
from the apparatus.

11) Only use attachments/

accessories specified by the
manufacturer.

01US01COV.book Page 2 Wednesday, February 20, 2008 11:34 AM

Advertising