Connecting an i.link digital video recorder – Sony PCG-NV200 User Manual
Page 114
Connecting an i.LINK digital video recorder
You can connect an i.LINK digital video (DV) recorder when the computer is on or off. Connecting the DV recorder when the
computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
To connect an i.LINK digital video recorder
1.
Turn on the DV device and the computer.
2.
Plug the i.LINK
®
cable into the i.LINK
/ DC IN/OUT port on the DV device.
3.
Plug the other end of the i.LINK cable into the i.LINK port
on your computer. The Found New Hardware
window appears on the lower right corner of your screen.
Connecting an i.LINK Digital Video Cam era Recorder
See the guide that came with your digital video camera recorder for more information on its installation and use.
Page 114