Sony DPP-FP30 - Manual (Page 10)

10 GB
• Never put your hand into the cartridge
compartment. The thermal head reaches
high temperatures, especially after
repeated printing.
• Do not rewind the ink ribbon and use the
rewound print cartridge for printing.
Otherwise, proper printing result will not
be obtained, or even a malfunction may
occur.
• If the print cartridge does not click into
place, remove it and then re-insert it. If the
ink ribbon is too slack to be loaded, wind
the ink ribbon in the direction of the arrow
to remove the slack.
• Do not remove the print cartridge while
printing.
Notes on storing the print cartridge
• Avoid placing the print cartridge in a
location subject to high temperatures, high
humidity, excessive dust or direct sunlight
• When you are going to store a partially-
used cartridge, store it in its original bag.
4 Inserting the print
paper
1
Open the eject paper tray.
2
Slide the paper tray lid in the
opposite direction to the
paper feeding direction (1)
and then lift open it (2).
3
Set the tray adaptor according
to the print paper size you
want to use.
Note
In some regions, 3.5 x 5 inch size print
paper is not sold.