Sony DPP-FP30 - Manual (Page 19)

19 GB
Printing from a PC (PC mode)
11
Connect the USB connectors of
the printer and your
computer.
Use a commercially available USB
connecting cable.
Continued
Notes
• You cannot connect a PictBridge-
compliant digital camera and a PC
simultaneously to the printer. When
printing from a PC, remove the
digital camera from the printer.
• Use a commercially available A-B
TYPE USB-compatible connecting
cable shorter than 3m in length. The
type of USB cable you should use
may differ depending on the
computer. For details, see the
instructions manual of your
computer.
When you connect a PC
The printer automatically enters the
PC mode and the printer setup will
start automatically.
When the printer setup is complete,
the “Setup Complete” dialog box is
displayed.
Windows PC
To USB
connector
To USB
connector
(B-TYPE)
12
Click “Finish”.
The installation of the printer driver
is complete. When you are
prompted to restart your computer,
restart the computer.
13
• To finish installation, click
“Complete” and remove the
CD-ROM from your
computer and keep it for
future use.
• To continue to install the
PictureGear Studio software,
click “Installing the
PictureGear Studio” and
follow the procedures on
pages 22.