Sony DSC-P72 - Manual (Page 95)

95
Tr
oub
lesh
oot
in
g
Computers
The resizing function
does not work. • Movie (MPEG movie)/Clip Motion/Multi Burst
files cannot be resized.
—
You cannot attach a print
(DPOF) mark. • Print (DPOF) marks cannot be attached to movie
(MPEG movie)/Clip Motion files.
—
You cannot cut a movie. • The movie is not long enough to cut.
• Protected movie (MPEG movie), Clip Motion,
Multi Burst files and still images cannot be cut.
—
—
Symptom Cause Solution
You do not know whether
or not your OS can be
used with the camera. — p Check “Recommended computer environment” (pages 78, 88).
You cannot install the
USB driver. — p In Windows 2000, log on as Administrator (authorized
Administrators).
Your computer does not
recognize your camera. • The camera is turned off.
• The battery level is too low.
• You are not using the supplied USB cable.
• The USB cable is not connected securely.
• [USB Connect] is set to [PTP] in the SET UP
settings.
• The USB connectors on your computer are
connected to other equipment besides the
keyboard, the mouse.
• The camera is not directly connected to your
computer.
• The USB driver is not installed.
• Your computer does not properly recognize the
device because you connected the camera and
your computer with the USB cable before you
installed the “USB Driver” from the supplied
CD-ROM.
p Turn on the camera (page 20).
p Use the AC Adaptor (not supplied) (page 19).
p Use the supplied USB cable (page 82).
p Disconnect the USB cable, and securely connect it again. Make
sure that “USB MODE” is displayed on the LCD screen
(page 82).
p Set it to [Normal] (page 107).
p Disconnect the USB cables except for those connected to the
keyboard and the mouse.
p Directly connect the camera and your computer without using a
USB hub.
p Install the USB driver (page 79).
p Delete the erroneously recognized device from your computer,
then install the USB driver (pages 79, 84).
Symptom Cause Solution