Indicator section, Control button section (top) – Sony FWD-50PX1 User Manual
Page 58
8
(GB)
Location and Function of Parts and Controls
Indicator Section
1
Remote control detector
Receives the signals from the Remote Commander.
2
POWER/STANDBY indicator
Lights up in green when the display unit is powered
on. Lights up in red in the standby mode.
When the POWER/STANDBY indicator blinks, see “Self-
diagnosis Function” on page 44 (GB).
Control Button Section (Top)
1
MENU button
Press to show menus. Press again to hide them.
2 3
m/M (cursor/volume) button
Press to move the cursor (yellow), set a value, or
control speaker volume.
4
ENTER button
Press to set your choice.
5
1 (POWER) switch
Press to power on the display unit. Press again to
return to the standby mode.
Note
To protect the panel, a certain amount of time is
required to turn the unit ON/STANDBY. Wait about 5
seconds after one of these operations before pressing
this switch again.
1
2
1
2
3
4
5