Sony DAV-DZ170 - Manual (Page 20)

20 US
Gettin
g
Star
ted
Caution
• Contact a screw shop or installer for information regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
1
Connect the speaker cord with the color tube to 3, and the speaker cord without the
color tube to #.
2
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
3
Fasten the screws to the wall, then hang the speaker on the wall.
When installing the speakers on a wall
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
30 mm (1
3
/
16
inches)
4 mm (
3
/
16
inch)
Hole on the back of
the speaker
5 mm
(
7
/
32
inch)
10 mm
(
13
/
32
inch)
8 to 10 mm
(
11
/
32
to
13
/
32
inch)
Depth of fastened screw
145 mm
(5
3
/
4
inches)
For the center speaker For the other speakers