Sony PEG-NX60 - Manual (Page 142)

Beaming 142
Beaming between your Sony CLIÉ Handheld and another Palm OS
®
PDA
Receiving beamed information
1
Turn on your CLIÉ handheld and point the IR port of your
CLIÉ handheld directly to the IR port of another Palm OS
PDA device.
The Beam dialog box is displayed and beaming of data starts.
2
Select the category where you want to save the received
data.
You can also create a new category to save the data to, or save it in the
Unfiled category.
3
Tap Yes.
The data is saved.
Note
When Beam Receive in the Preferences screen is set to Off , you cannot receive data
using the beaming feature. Prior to beaming data, set Beam Receive to On .
Tips on beaming information
• Data or applications received by beaming are saved in the Unfiled category.
• You can press the Address Book button for about two seconds to beam
your business card.
• You can use Graffiti
®
writing to beam the current entry ( then , or
and then tap ).