Sony PEG-NX60 - Manual (Page 69)

Customizing your Sony CLIÉ Handheld (Preferences) 69
Adding/Changing the preference for the
modem
You can customize the preference for a modem to be connected to your CLIÉ
handheld. The applications using the modem comply with this preference.
1
Tap the arrow V in the upper right of the Preferences screen
and select Connection.
2
Tap New.
To change the existing preference, tap the preference you want to change
and
Edit .
3
Enter the connection name in Name.
Enter the name that is recognizable.
4
Tap the arrow V next to Connect to and select how you
connect your CLIÉ handheld to your computer.
5
Tap the arrow V next to Via and select what you use to
connect your CLIÉ handheld to your computer.
When you select a modem for Connect to
1 Tap the arrow V next to Dialing and select the type of line you want
to use.
Usually, select
TouchTone™ .
Do not select Rotary , except when you are sure that the telephone
service being used is not TouchTone™ .
2 Tap the arrow V next to Volume and select the volume of the modem
speaker at the time of connection.
3 Tap Details .
4 Tap the arrow V next to Speed and select the maximum speed for the
transmission between the modem and CLIÉ handheld.
5 Tap the arrow V next to Flow Ctl and select the flow control of the
modem connection.
Usually, select
Automatic .
6 Enter the modem initialization command in the Init String .
By default, it is set to either AT&FX4 or ATZ . If the modem
initialization command is not specified on the modem, it is not required
to change.
7 Tap OK .
Continued on next page
• • • • • • • • • • • • • • • • • • •