Sony ILCE-6000 - Manual (Page 188)

Interchangeable Lens Digital Camera
ILCE-6000
AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens, when using an A-mount lens with the Mount
Adaptor LA-EA2 or LA-EA4 (sold separately).
1. Select MENU
→
(Custom Settings)
→ [AF Micro Adj.].
2. Select [AF Adjustment Set.]
→ [On].
3. [amount]
→ desired value.
You can select a value between −20 and +20. Selecting a positive value shifts the autofocused position away
from the product. Selecting a negative value shifts the autofocused position closer to the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered value appears on the screen.
[±0] appears for lenses for which a value has not yet been registered.
If
[−] is displayed as the value, then a total of 30 lenses have been registered and no new lens can be registered. To
register a new lens, attach a lens for which the registration can be erased, and set its value to [±0], or reset the values
of all the lenses using [Clear].
Use [AF Micro Adj.] with Sony, Minolta, and Konica-Minolta lenses only. If you use [AF Micro Adj.] with other brands
of lenses, the registered value may be affected. Do not perform [AF Micro Adj.] with an unsupported lens.
You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konica-Minolta lens of the same specification.
Notes on use
4-534-933-11(1)
Copyright 2014 Sony Corporation
Help Guide
How to Use
183