Sony ERS-7M3 - Manual (Page 86)

Setting y
o
ur Pr
ef
e
rences
86
Movie
You can change various settings for movie recording.
Specify whether sound should also be
recorded during continuous recording.
Select the video file format.
Select this setting to record
continuously from start to finish.
Select this setting to record
intermittently at certain intervals.
When this setting is selected, you
should also set the recording
interval and specify whether to
switch to continuous recording
when motion or sound is detected. Specify whether to display the time in the
recorded video.
To switch to continuous recording when
motion or sound is detected, select the
check box and set the sensitivity level here.*
High:
Even small movements and
low-level sounds are detected.
Normal: Small movements and low-level
sounds are not detected.
Low: Only large movements and
high-level sounds are detected.
Specify whether the AIBO
®
Entertainment Robot should
automatically start interval
recording in House Sitting mode.
Specify the interval for creating
new video files. When the time set
here has elapsed, a new video file
is created.
Specify the full path to the folder where
recorded video files are to be stored.
You can also click “Browse” and select a folder.
After changing settings, click this
button.
z Hint
The “Movie” settings cannot be changed while a recording is in progress.
* This sensitivity setting will not become active until the AIBO robot
goes into House Sitting mode. If the AIBO robot is in House Sitting
mode and interval recording has automatically started, the
sensitivity for detecting motion and sound will be as set in the
House Sitting mode. (This includes the detection sensitivity being
set to “off”.)
Specify the interval for recording.