Sony PCG-C1VPK - Manual (Page 110)

Change to Current Document Title
110
The image on my connected external display is not centered or sized properly.
Use the controls on your external display to adjust the image. See the manual that
came with your display for more information.
I cannot simultaneously display movies, DVD video, or the Smart Capture
(Finder) window on the LCD display and an external display.
Images cannot be displayed on both the LCD display and an external display at
the same time. Select only one display option.
I want to change the video resolution of my display.
You can use independent controls to change the video resolution of your display.
❑ Click Start, point to Settings, point to Control Panel, and then click the
Display icon.
The Display Properties dialog box appears.
❑ Click on the Settings tab.
❑ Move the Screen Area slider to change your video resolution.
Troubleshooting the mouse and pointing device
My mouse does not work.
❑ If you are using an external mouse, check that the mouse is plugged into the
mouse connector. See “Connecting a USB Mouse” for details.
❑ If you connected an external mouse while your notebook is on, you must
restart your notebook.
❑ If you are using an optional Sony USB mouse PCGA-UMS1 series, check
that the mouse is plugged into the USB connector.
❑ Re-install the mouse/touchstick drivers. For details, see “Using the
Application, Driver, and Recovery CDs”.
My pointing device does not work properly.
❑ You may have disabled the pointing device without a mouse being connected
to the notebook. You must restart the notebook to make the pointing device
work again.
❑ If your pointing device is interpreting a single tap as a double-click, you
must adjust the button assignments. Follow these steps: