Remote control built-in battery pack – Sony DPF-D830 User Manual

Page 50

Advertising
background image

50

GB

Remote control

Built-in battery pack

Symptom

Check item

Cause/Solutions

Nothing happens
even if you operate
the remote control.

• Is the battery inserted in the

remote control properly?

c Replace the battery. (page 9)
c Insert a battery. (page 9)
c Insert a battery in the proper orientation.

(page 9)

c Point the top end of the remote control

towards the remote sensor on the photo
frame. (page 9)

c Remove any obstruction between the

remote control and the remote sensor.

• Is there a protective sheet

inserted?

c Remove the protective sheet. (page 9)

• Is the AC adaptor connected

correctly?

c The 1 (standby) button on the remote

control cannot be used when the photo
frame is powered only by the built-in
battery pack. Use the 1 (standby) button
on the photo frame.

Symptom

Check item

Cause/Solutions

Cannot charge the
built-in battery
pack.

• Is the standby indicator lit?

c If an internal temperature of the photo

frame rises owing to direct sunlight, etc.,
battery charging becomes disabled. In
such a case, the standby indicator does not
light, but this is not a malfunction of the
photo frame.

Advertising