Sony MDR-XB300 User Manual

Stereo headphones, Mdr-xb300, English features

Advertising
background image

English

Features

XB driver units

Powerful bass sound is realized through XB driver units engineered
exclusively by Sony

Direct Vibe Structure

Tightly sealed acoustic design for a high level of sound isolation
and booming bass sound

King Size Ear Cushion

Ultra-thick pressure-relieving earpads cushion your ears for
unbeatable, supreme comfort

• Durable and lightweight flat cord

How to use

(see fig. A)

These headphones are for use with a stereo mini jack.

Wear the headphone marked R on your right ear, and the one marked
L on your left ear.
There is a tactile dot on the unit marked L to distinguish the left side.

Specifications

Type: Closed, dynamic (supra-aural) / Driver unit: 30 mm (CCAW
Voice Coil), dome type / Power handling capacity: 1,000 mW (IEC*) /
Impedance: 24

Ω at 1 kHz / Sensitivity: 100 dB/mW / Frequency

response: 5 – 22,000 Hz / Cord: 1.2 m (47

1

/

4

in), Y-type, flat / Plug:

Gold-plated L-shaped stereo mini plug / Mass: Approx. 120 g
(4.23 oz) without cord
* IEC = International Electrotechnical Commission

Design and specifications are subject to change without notice.

Precautions

• Listening with headphones at high volume may affect your

hearing. For traffic safety, do not use while driving or cycling.

• Do not subject the headphones to excessive shock.
• Handle the driver units carefully.
• Do not put weight or pressure on the headphones as it may cause

the headphones to deform during long storage.

• The ear cushions may deteriorate due to long-term storage or use.
• The ear cushions are hand-made parts so the stitches and grain of

each may differ.

• Do not leave the jack plug dirty otherwise the sound may be

distorted.

• Clean the headphones with a soft dry cloth. Do not blow on the

units when cleaning. Do not allow the plug to become dirty,
otherwise the sound may deteriorate.

• Do not leave the stereo headphones in a location subject to direct

sunlight, heat or moisture.

• Because the headphones are of a high density enclosure, forcing

them against your ears may result in eardrum damage. Avoid using
the headphones where they are liable to be struck by people or
other objects, such as a ball, etc.
Pressing the headphones against your ears may produce a
diaphragm click sound. This is not a malfunction.

Optional replacement ear cushions can be ordered from your
nearest Sony dealer.

Stereo Headphones

MDR-XB300

©2008 Sony Corporation Printed in Thailand

Operating Instructions

Manual de instrucciones

4-120-072-21(1)

A

Tactile dot

Advertising