Sony ICD-SX68 - Manual (Page 60)

ICD-SX68 GB 3-297-851-71 (2)
0
GB
Windows® XP Media Center Edition 2005
Service Pack 2 or higher log on as a user
name with the “Computer administrator”
user account. (To find if the user name has
a “Computer administrator” user account,
open the “User Accounts” from the “Control
Panel” and refer to the section beneath the
user name being displayed.) compatible with
any of the supported operating systems,
log on as a user name with the “Computer
administrator” user account. (To find if the
user name has a “Computer administrator”
user account, open the “User Accounts” from
the “Control Panel” and refer to the section
beneath the user name being displayed.)
When the “Memory Stick Voice Editor
1.0/1.1/1.2/2.0” software has already been
installed, installing the supplied software
will automatically remove the “Memory Stick
Voice Editor” software. (Messages are not
removed.)
After installing, the Microsoft DirectX module
is also installed depending on the operation
system of your computer. This module is not
deleted after uninstalling the software.
After installing the Digital Voice Editor
software, do not install the “Memory Stick
Voice Editor 1.0/1.1/1.2/2.0” software. The
Digital Voice Editor will not work properly.
With the supplied software, you can save or
edit the messages in the “Memory Stick”.




1
Make sure that the IC recorder
is not connected and then turn
on your computer and start up
Windows.
2
Insert the supplied CD-ROM into
the CD-ROM drive.
The [IC Recorder Software Setup]
menu starts up automatically and the
[Welcome to IC Recorder Software
Setup] window appears. If the
[Welcome to IC Recorder Software
Setup] menu does not start up, open
the [DVE] folder in the [Setup] folder
on the CD-ROM, and then double click
[setup.exe].
3
Make sure that you accept the terms
of the license agreement, select
[I accept the terms of the license
agreement], and then click [Next].
The [Software Install] window appears.
4
Select [Digital Voice Editor Ver.
3.1.02], and then click [Install].
Follow the instructions on the screen
to make the settings required for
installation.