Sony KV-27FS200 User Manual
Page 21
13
Connecting Your TV
Connecting a TV, Satellite Receiver, and VCR
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on
your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to
AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
✍
To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing
on the remote control.
1
3
4
Audio R (red)
Audio L (white)
2
From
cable/
antenna
3
Satellite Receiver
1
4
5
Video (yellow)
VCR
Rear of TV