Troubleshooting audio, My speakers have no sound – Sony PCG-R505ES User Manual

Page 206

Advertising
background image

VAIO® Computer User Guide

206

Troubleshooting Audio

My speakers have no sound.

❑

If the built-in speakers are turned off, press the Fn+F3 keys or use the center
Jog Dial control to turn on the speakers.

❑

If the speaker volume is turned to the minimum, press the Fn+F4 keys, then
press or to increase the volume, or you can use the center Jog Dial™
control to control the volume.

❑

If nothing is displayed when you press the Fn+F3 or Fn+F4 keys, proceed as
follows:

1

Click Start, point to Settings, and then to Control Panel.

2

Click Sounds and Multimedia. The Sounds and Multimedia Properties
dialog box appears.

3

Select the Audio tab, and click Advanced in the Sound Playback box.
The Advanced Audio Properties dialog box appears.

4

Make sure the Speakers tab is open, and the correct speaker setup is
selected in the Speaker Setup box. Click OK.

5

Click Volume in the Sound Playback box. The Volume Control dialog
box appears.

6

Make sure the mute check boxes are not selected in the Volume Control
and Stereo Wide columns.

7

Close the Volume Control dialog box.

8

Click OK.

❑

If your computer is powered by batteries, verify the battery packs are
inserted properly and are charged.

❑

If you are using an application that has its own volume control, verify the
volume is turned up.

❑

Check the volume controls in the Windows® taskbar.

❑

If you connect external speakers:

❑

Verify the speakers are properly connected and the volume is turned up.

❑

If the speakers have a mute button, make sure the button is off.

Advertising