Sony DCR-TRV70 - Manual (Page 23)

23
Preparation for Network Operation
(4) Open the Network Menu.
For details of how to open the Network Menu, see page 7.
Notes
•Directly connect the USB-Ethernet Adaptor with your camcorder. Your camcorder
cannot access the Internet when connected through a USB hub.
•Do not connect an unspecified network or telephone line to the USB-Ethernet
Adaptor. Doing so may cause a malfunction, overheating or fire. For details, refer to
the operating instructions supplied with the USB-Ethernet Adaptor.
To disconnect your camcorder from LAN
(1) Remove the USB connector of the USB Ethernet Adaptor from (USB) jack of
your camcorder.
(2) Close the jack cover of your camcorder.
(3) Remove the LAN cable from the USB Ethernet Adaptor.
Setting up USB devices