Sony DCR-DVD203 - Manual (Page 19)

19
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803
2-587-622-11 (1)
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803
2-587-622-11 (1)
Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
For DCR-DVD92/DVD103/DVD602/DVD653
Battery pack
LCD screen
opened*
LCD screen
closed
NP-FP50
(supplied)
105 125
NP-FP70 225 265
NP-FP90 400 475
For DCR-DVD203/DVD703
Battery pack
LCD screen
opened*
LCD screen
closed
NP-FP50
(supplied)
90 110
NP-FP70 190 235
NP-FP90 345 415
For DCR-DVD403/DVD803
Battery pack
LCD screen
opened*
LCD screen
closed
NP-FP50 90 105
NP-FP70
(supplied)
190 225
NP-FP90 345 400
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the
POWER switch up to OFF (CHG).
• The CHG (charge) lamp flashes during
charging, or BATTERY INFO (p.37) will not
be correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged.
(For BATTERY INFO only.)
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC jack of your camcorder, even when the
power cord is disconnected from the wall outlet.
• We recommend that you use an NP-FP70 or
NP-FP90 battery pack when a video light
(optional) is attached.
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C
(77°F). (10-30°C (50-86°F) is recommended.)
• Available recording and playback time will be
shorter when you use your camcorder in low
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
• Use the nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
PRECAUTION
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.
Getting Started