Sony DSC-W200 - Manual (Page 105)

105
T
ro
uble
sho
oti
n
g
Troubleshooting
• When shooting a still image, set the mode dial to a position other than .
• Set the mode dial to when shooting movies.
• The image size is set to [640(Fine)] when recording movies. Do one of the following:
– Set the image size to other than [640(Fine)].
– Insert a “Memory Stick PRO Duo”.
Movie recording stops during shooting.
• Movie recording stops automatically when the file size of the movie reaches approximately
2 GB.
This subject is not visible on the screen.
• Your camera is set to the playback mode. Press to change to the recording mode
(page 32).
Anti-blur function does not work.
• The anti-blur function does not work when appears on the display.
• The anti-blur function may not work properly when shooting night scenes.
• Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.
Recording takes a long time.
• The NR slow shutter function is activated (page 17). This is not a malfunction.
The image is out of focus.
• The subject is too close. Shoot in (Macro) recording mode. Make sure to position the lens
farther away from the subject than the shortest shooting distance, approximately 5 cm
(2 inches) (W)/34 cm (1 feet 1 1/2 inches) (T), when shooting (page 26).
• (Twilight mode) or (Landscape mode) or (Fireworks mode) is selected in the Scene
mode when shooting still images.
• The Focus preset function is selected. Select the auto focus mode (page 46).
• Refer to “If the subject is out of focus” on page 47.
Zoom does not work.
• You cannot use the Smart zoom when:
– (Extra High Sensitivity mode) is selected in the Scene mode.
– the image size is set to [12M], [3:2].
• The digital zoom cannot be used while shooting movies.
• You cannot change the zoom scale while shooting a movie.
• Confirm that the setting of [Conversion Lens] is correct.
• When [Face Detection] is set to [On], you cannot use the Digital Zoom.