Sony DSC-P51 - Manual (Page 38)

38
Viewing images on a TV screen
, Using the video connecting
cable, connect the VIDEO OUT
jack of the camera to the Image
of the TV set.
• Connect the video cable to the camera and the
TV set only after confirming that both are
turned off.
, Turn on the power of the TV
set, and set the TV/Video
toggle switch of the TV to
“Video.”
• Depending on your TV set, the name and
location of this switch may be different.
, Set the mode dial to and
turn on the camera.
Press b/B on the control button to select an
image.
• When using this feature, it may be necessary to
switch the video output signal to match that of
your TV system (see page 98).
1
VIDEO OUT jack
Video connecting cable
(supplied)
2
TV/Video toggle switch
FILE BACK/NEXT
10:30 PM 2002 7 4 100-0028
11 / 18 640
3