Sony PCG-N505VE - Manual (Page 49)

Connecting the i.LINK Port Replicator 39
3
Fold the port replicator cable into the compartment on the side of the
port replicator.
Connecting a Printer
You can use the port replicator to connect a Windows 98-compatible
printer or other parallel port device to your computer.
To connect a printer
❑
Use the symbol to locate the Printer connector on the port
replicator. Plug the printer cable (supplied with the printer) into this
connector.
✍
You cannot use the optional PCGA-PR5 port replicator with your computer.
✍
Turn off your computer and the printer, unplug the AC adapter and the power cord before
connecting the printer.
Connect the power cord after connecting all other cables.
Turn on the peripherals, then turn on your computer.
If you connect the printer which is not compatible with the Windows 98, your computer
and the printer may not work properly.