Sony COM-2BLACK - Manual (Page 6)

COM-2.US.Web.4-118-106-01(1)
6
Video
(compliant with Ver.1.100 or later)
About supported video formats
This unit also supports WMV formats in addition to those stated in “Supported
video formats” described in “Operating Instructions” manual (PDF).
Supported file format:
ASF
Supported file extension:
wmv
Supported video codec:
WMV9 (VC-1) (Simple Profile)
Bit rate: 768 kbps (maximum)
Frame rate: 30 fps (maximum)
Resolution: 320 × 240 (maximum)
Supported audio codec:
WMA
Bit rate: 256 kbps (maximum)
Sampling frequencies: 24/44.1/48 kHz
USB mode when transferring video files from a computer
You can use “MTP (Media Transfer Protocol)” in addition to “MSC (Mass
Storage Class),” which is explained in “Operating Instructions” manual (PDF).
USB mode Software program Transfer To
MTP (Media Transfer Protocol)
Windows Explorer
Windows Media Player 10, 11
Internal memory
To change the USB mode to “MTP,” select “Tools” on the Home menu, and
then select “Settings,” followed by the “USB Mode.” After that, tap of
“MTP” to switch it to .
Using Windows Media Player 10 or 11
You can transfer video files or playlists to the unit using Windows Media Player.
Before transferring video files, be sure to set the unit’s USB mode to “MTP” and
connect the unit to a computer. To transfer video files, start Windows Media
Player, and click “Sync” at the top of the window, and then select this unit in the
right pane. This unit is displayed as “Personal Communicator.” Select video files
to transfer in the left pane, and click “Start Sync.”