Sony PCGA-PRZ1 User Manual

Port replicator, Before use, Specifications

Advertising
background image

Operating Instructions

Mode d’emploi

Gebruiksaanwijzing

Bedienungsanleitung

Istruzioni per l’uso

Manual de instrucciones

操作說明

Sony Corporation © 2003 Printed in Japan

PCGA-PRZ1

4-671-553-12(1)

Port Replicator

Printed on 100% recycled paper using VOC (Volatile Organic
Compound)-free vegetable oil based ink.

English

WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.

• Use your product only with the AC adapter supplied with your

notebook.

• To disconnect it completely from mains voltage, unplug the AC

adapter.

• Make sure that the socket outlet is easily accessible.

For customers in the USA

Owner’s Record

The model number and serial number are located on the bottom of
your port replicator. Record the serial number in the space provided
here. Refer to the model and serial number when you call your Sony
Service Center.
Model No. PCGA-PRZ1
Serial No. ___________________

WARNING

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference using one or
more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Only peripherals (computer input/output devices, terminals, printers,
etc.) that comply with FCC Class B limits, may be attached to this
computer product. Operation with non-compliant peripherals is likely
to result in interference to radio and television reception.

All cables used to connect peripherals must be shielded and grounded.
Operation with cables, connected to peripherals, that are not shielded
and grounded, may result in interference to radio and television
reception.

If you have any questions about this product, you can reach the Sony
Customer Infomation Service Center at 1-888-476-6972 in the United
States or 1-800-961-7669 in Canada; or write to the Sony Customer
Information Service Center at 12451 Gateway Blvd, Ft. Meyers, FL
33913, or find Sony Customer Service on the Web at
http://www.sony.com/pcsupport.

Declaration of Conformity
Trade Name:

SONY

Model No.:

PCGA-PRZ1

Responsible Party:

Sony Electronics Inc.

Address:

680 Kinderkamack Road, Oradell,
NJ 07649 USA

Telephone No.:

201-930-6972

This phone number is for FCC-related matters only.

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

For customers in Europe

This product conforms with the following European Directives:

73/23/EEC (Low Voltage Directive)
89/336/EEC, 92/31/EEC (EMC Directives)
93/68/EEC (CE-Marking Directive)

This equipment complies with EN55022 Class B and EN55024 for use
in the following areas: residential, commercial, and light-industrial.

This equipment has been tested and found compliant with the limits
sets out on the EMC Directive for using a connection cables not longer
than 3 metres (9.8 feet).

Audio and picture distortion may occur if this equipment is positioned
in close proximity to any equipment emitting electromagnetic
radiation.

Before use

Before using the port replicator, please read this manual thoroughly
and retain it for future reference. See also the manuals provided with
your notebook for more information about connecting the port
replicator.
The Sony PCGA-PRZ1 port replicator is designed for Sony notebooks.
However, it may not be used with some models.

Specifications

Connectors

Port replicator connector: custom connector (1)
USB: Type-A connector (3)*

1

PRINTER port: D-sub 25 pin (1)
External display output (

a

MONITOR/

DVI-D):

analog RGB, mini D-sub 15-pin (1)
DVI connector (1)

NETWORK connector:

RJ-45 connector (1)*

2

*

1

The specifications are the same as those of the notebook you
are using. For details, refer to the manuals provided with
your notebook.

*

2

There is an Ethernet port for 10 BASE-T, 100 BASE-TX.

Power requirements

AC adapter

Operating temperature

41°F to 95°F (5°C to 35°C)
(temperature gradient less than 18°F (10°C)/hour)

Operating humidity

20 % to 80 % (not condensed), provided that humidity
is less than 65 % at 95°F (35°C)
(hygrometer reading of less than 84°F (29°C))

Storage temperature

–4°F to 140°F (–20°C to 60°C)
(temperature gradient less than 18°F (10°C)/hour)

Storage humidity

10 % to 90 % (not condensed), provided that humidity
is less than 20 % at 140°F (60°C)
(hygrometer reading of less than 95°F (35°C))

Dimensions

Approx. 12.6

Ч

1.9

Ч

6.3 inches (w/h/d)

(Approx. 318

Ч

48

Ч

160 mm)

Mass

Approx. 18.4 oz. (520 g)

Supplied accessories

Operating instructions (1)

Design and specifications are subject to change without notice.

Notes on use

• Use the port replicator with an AC adapter that is compatible with

your notebook. See also the manuals provided with your Sony
notebook for more information.

• To disconnect the port replicator completely from the mains

voltage, unplug the AC adapter.

• Make sure that the socket outlet is easily accessible.
• Do not place the unit in locations that are:

– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Subject to strong magnetic fields
– Sandy
– Subject to direct sunlight

• Do not apply mechanical shock or drop the unit.
• Make sure that nothing metallic comes into contact with the metal

parts of the unit. If this happens, a short-circuit may occur and the
unit may be damaged.

• Do not operate the unit with a damaged cord.
• Do not operate the unit if the unit itself has been dropped or

damaged.

• Always keep the metal contacts clean.
• Do not disassemble or convert the unit.
• While in use, it is normal for the unit to get warm.
• Keep the unit away from TV or AM receivers, because it can disturb

TV or AM reception.

On cleaning

Clean the unit with a soft dry cloth, or a soft cloth lightly moistened
with a mild detergent solution. Do not use any type of solvent, such as
alcohol or benzine, which may damage the finish.

Français

AVERTISSEMENT

Pour éviter tout risque d’incendie ou d’électrocution,
préservez cet appareil de la pluie ou de l’humidité.

Pour prévenir tout risque d’électrocution, n’ouvrez
pas le boîtier. Confiez l’entretien exclusivement au
personnel qualifié.

• N’utilisez le réplicateur de ports qu’avec l’adaptateur secteur fourni

avec votre ordinateur portable.

• Pour déconnecter complétement votre ordinateur portable de

l’alimentation secteur, débranchez l’adaptateur secteur.

• Assurez-vous que la prise secteur est facilement accessible.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.

Pour les utilisateurs en Europe

Ce produit est conforme aux directives européennes suivantes:

73/23/CEE (Basse tension)
89/336/CEE, 92/31/CEE (Compatibilité électromagnétique)
93/68/CEE (Directive concernant le marquage CE)

Cet équipement est conforme aux normes EN55022 Classe B et
EN55024, limitant l’emploi dans les environnements résidentiel,
commerciales et industriel léger.

Cet appareil a été testé et déclaré conforme aux limites de la Directive
CEM lors de l’utilisation d’un câble de raccordement d’une longueur
inférieure à 3 mètres (9,8 pieds).

Une distorsion peut perturber le son et l’image si l’appareil est placé
très près d’un appareil émettant une radiation électromagnétique.

Avant utilisation

Avant d’utiliser ce réplicateur de ports, lisez attentivement le présent
mode d’emploi et conservez-le pour toute référence ultérieure. Voir
aussi les manuels fournis avec votre ordinateur portable pour obtenir
plus d’informations sur le raccordement du duplicateur de port.
Le PCGA-PRZ1 Sony est conçu pour les ordinateur portables Sony.
Cependant, il est possible qu’il ne fonctionne pas avec tous les
ordinateurs portables Sony.

Spécifications

Connecteurs

Connecteur du duplicateur de port:

Connecteur spécial (1)

USB: connecteur de type A (3)*

1

Port imprimante (PRINTER):

D-SUB à 25 broches (1)

Sortie écran externe (a MONITOR/

DVI-D):

RVB analogique, mini-connecteur D-Sub à 15

broches (1)

connecteur DVI (1)

Réseau (NETWORK):

Connecteur RJ-45 (1)*

2

*

1

Les spécifications sont les mêmes que celles de l’ordinateur
portable que vous utilisez. Pour plus de détails, reportez-
vous aux manuels fournis avec cet ordinateur portable.

*

2

Il existe un connecteur réseau pour la correspondance à 10
BASE-T, 100 BASE-TX.

Alimentation Adaptateur secteur
Température de service

5°C à 35°C (41°F à 95°F)
(gradient de température inférieur à 10°C (18°F) heure)

Humidité de service

20 % à 80 % (sans condensation), à condition que le
taux d’humidité soit inférieur à 65 % pour une
température de 35°C (95°F)
(valeur hygrométrique inférieure à 29°C (84°F))

Température de stockage

–20°C à 60°C (–4°F à 140°F)
(gradient de température inférieur à 10°C (18°F)/
heure)

Humidité de stockage

10 % à 90 % (sans condensation), à condition que le
taux d’humidité soit inférieur à 20 % pour une
température de 60°C (140°F)
(valeur hygrométrique inférieure à 35°C (95°F))

Dimensions

Approx. 318

Ч

48

Ч

160 mm (l/h/p)

(Approx. 12,6

Ч

1,9

Ч

6,3 pouces)

Masse

Approx. 520 g (18,4 oz.)

Accessoires fournis

Mode d’emploi (1)

La conception et les spécifications sont sujettes à modifications sans
préavis.

Remarques sur
l’utilisation

• Utilisez le replicateur de ports avec un adaptateur secteur

compatible avec votre ordinateur portable. Voir aussi les manuels
fournis avec votre ordinateur portable Sony pour obtenir plus
d’informations.

• Pour déconnecter complètement votre ordinateur portable de

l’alimentation secteur, débranchez l’adaptateur secteur.

• Assurez-vous que la prise secteur est facilement accessible.
• Ne placez pas l’appareil dans des endroits :

– extrêmement chauds ou froids;
– poussiéreux ou sales;
– très humides;
– soumis à des vibrations;
– soumis à de puissants champs magnétiques;
– sablonneux;
– exposés au rayonnement direct du soleil;

• Ne soumettez pas l’appareil à des chocs mécaniques et ne le laissez

pas tomber.

• Veillez à ce qu’aucun objet métallique n’entre en contact avec les

parties métalliques de cet appareil. Si cela se produit, un court-
circuit risque de survenir et d’endommager l’appareil.

• Ne faites pas fonctionner l’appareil avec un câble endommagé.
• Ne faites pas fonctionner l’appareil s’il est tombé ou a subi des

dommages.

• Veillez à ce que les contacts métalliques restent toujours propres.
• Ne démontez pas et ne transformez pas l’appareil.
• Le système chauffe en cours d’utilisation. C’est normal.
• Gardez l’appareil à l’écart des téléviseurs et des récepteurs AM, il

peut causer des interférences dans la réception télévisée ou
radiophonique.

Entretien

Nettoyez l’appareil au moyen d’un chiffon sec et doux, ou légèrement
imprégné d’une solution détergente neutre. N’utilisez aucun type de
solvant, comme de l’alcool ou de l’essence, qui risquerait de ternir le
fini de l’appareil.

Nederlands

WAARSCHUWING

Om gevaar voor brand of elektrische schokken te
voorkomen, mag het apparaat niet worden
blootgesteld aan regen of vocht.

Open de behuizing niet om elektrocutie te
voorkomen. Laat het toestel alleen nakijken door
bevoegd vakpersoneel.

• Gebruik het apparaat uitsluitend met de netspanningsadapter die bij

uw notebook is geleverd.

• Koppel de netspanningsadapter los om de stroomvoorziening

volledig uit te schakelen.

• Zorg ervoor dat het stopcontact goed bereikbaar is.

Voor klanten in Europa

Dit produkt beantwoordt aan de volgende Europese Richtlijnen:

73/23/EEG (laagspanningsrichtlijn)
89/336/EEG, 92/31/EEG (EMC Richtlijnen)
93/68/EEG (CE-markeringsrichtlijn)

Dit produkt beantwoordt aan de normen EN55022 Klasse B en
EN55024 voor gebruik in de volgende omgevingen: residentieel,
commercieel en licht industrieel.

Dit toestel werd getest en conform bevonden zoals bepaald door de
EMC Richtlijn met een verbindingskabel van minder dan 3 meter lang.

Wanneer dit toestel te dicht bij apparatuur wordt geplaatst die
elektromagnetische straling produceert, kunnen beeld en/of geluid
worden gestoord.

Deutsch

ACHTUNG

Um Feuergefahr und die Gefahr eines elektrischen
Schlags zu vermeiden, setzen Sie das Gerät weder
Regen noch sonstiger Feuchtigkeit aus.

Um einen elektrischen Schlag zu vermeiden, öffnen
Sie das Gehäuse nicht. Überlassen Sie
Wartungsarbeiten stets nur qualifiziertem
Fachpersonal.

• Verwenden Sie für den Betrieb dieses Produkts ausschließlich den

mit Ihrem Notebook mitgelieferten Netzadapter.

• Zur vollständigen Trennung dieses Produkts vom Netz ist der

Netzadapter aus der Netzsteckdose zu ziehen.

• Bitte achten Sie darauf, dass die Netzsteckdose leicht zugänglich ist.

Für Kunden in Europa

Richtlinien: Dieses Gerät erfüllt die Richtlinien

73/23/EWG (Niederspannungsrichtlinie)
89/336/EWG, 92/31/EWG (EMV-Richtlinien)
93/68/EWG (Richtlinie über die CE-Kennzeichnung)

Dieses Gerät erfüllt die Standards EN55022 Klasse B und EN55024 für
folgende Gebiete:
• Wohngebiete
• Gewerbegebiete
• Leichtindustriegebiete

Dieses Gerät wurde geprüft und erfüllt die EMV-Richtlinie, sofern ein
Verbindungskabel von unter 3 m Länge verwendet wird.

Bild-und Tonstörungen können auftreten, wenn das Gerät in der Nähe
von elektromagnetischen Störquellen betrieben wird.

Vorbereitung

Lesen Sie diese Anleitung vor Inbetriebnahme des Port-Replikators
bitte genau durch, und bewahren Sie sie zum späteren Nachschlagen
sorgfältig auf. Weitere Informationen zum Anschließen des Port-
Replikators finden Sie auch in den Handbüchern zum Notebook.
Der PCGA-PRZ1 von Sony ist ein Port-Replikator für Sony Notebooks.
Es lässt sich unter Umständen jedoch mit einigen Modellen nicht
einsetzen.

Technische Daten

Anschlüsse

Anschluss für Port-Replikator:

Spezialanschluss (1)

USB: Anschluss vom Typ A (3)*

1

Anschluss PRINTER: D-sub, 25polig (1)
Ausgang für externen Bildschirm

(

a

MONITOR/

DVI-D):

RGB, analog, Mini-D-Sub, 15-polig (1)
DVI-Anschluss (1)

Anschluss NETWORK:

RJ-45-Anschluss (1)*

2

*

1

Die Spezifikationen sind dieselben wie beim Notebook, das Sie
verwenden. Erläuterungen dazu finden Sie in der Dokumentation zu
Ihrem Notebook.

*

2

Es gibt einen Netzwerkanschluss, der 10 BASE-T und
100 BASE-TX entspricht.

Stromversorgung

Netzadapter

Betriebstemperatur

5°C bis 35°C (Temperaturschwankungen von unter 10°C/Stunde)

Luftfeuchtigkeit bei Betrieb

20 % bis 80 % (nicht kondensierend)
Bei einer Temperatur von 35°C muss die Luftfeuchtigkeit unter 65 %

liegen (Hygrometerstand unter 29°C)

Lagertemperatur

–20°C bis 60°C (Temperaturschwankungen von unter 10°C/Stunde)

Luftfeuchtigkeit bei Lagerung

10 % bis 90 % (nicht kondensierend)
Bei einer Temperatur von 60°C muss die Luftfeuchtigkeit unter 20 %

liegen (Hygrometerstand unter 35°C)

Abmessungen

ca. 318

Ч

48

Ч

160 mm (B/H/T)

Gewicht

ca. 520 g

Mitgeliefertes Zubehör

Bedienungsanleitung (1)

Änderungen, die dem technischen Fortschritt dienen, bleiben
vorbehalten.

Hinweise zur
Verwendung des
Geräts

• Benutzen Sie den Port-Replikator nur mit einem Netzadapter, der

mit Ihrem Notebook kompatibel ist. Weitere Informationen finden
Sie auch in den Handbüchern Ihres Sony Notebook.

• Zur vollständigen Trennung Ihres Port-Replikators vom Netz ist

der Netzadapter aus der Netzsteckdose zu ziehen.

• Bitte achten Sie darauf, dass die Netzsteckdose leicht zugänglich ist.
• Stellen Sie das Gerät nicht an einen Ort, an dem es folgenden

Bedingungen ausgesetzt ist:
– extremen Temperaturen
– Staub oder Schmutz
– hoher Luftfeuchtigkeit
– Vibrationen
– starken Magnetfeldern
– Sand
– direktem Sonnenlicht

• Setzen Sie das Gerät keinen mechanischen Erschütterungen aus,

und lassen Sie es nicht fallen.

• Achten Sie darauf, dass keine Metallgegenstände mit den

Metallteilen dieses Geräts in Berührung kommen. Andernfalls kann
es zu einem Kurzschluss kommen, und das Gerät könnte
beschädigt werden.

• Verwenden Sie das Gerät nicht mit einem beschädigten Kabel.
• Verwenden Sie das Gerät nicht, wenn es heruntergefallen oder

beschädigt ist.

• Halten Sie die Metallkontakte sauber.
• Zerlegen Sie das Gerät nicht, und nehmen Sie keine Veränderungen

daran vor.

• Das Gerät erwärmt sich während des Betriebs. Das ist normal.
• Halten Sie das Gerät von Fernseh- oder AM-Empfängern fern.

Der Empfang kann gestört werden.

Reinigung

Reinigen Sie das Gerät mit einem weichen, trockenen Tuch oder einem
weichen Tuch, das Sie leicht mit einem milden Reinigungsmittel
angefeuchtet haben. Verwenden Sie keine Lösungsmittel wie Alkohol
oder Benzin, da dies zu Beschädigungen der Oberfläche führen kann.

Advertising