Sony MFM-HT95 - Manual (Page 10)

10
To connect to an IBM PC/AT or compatible computer
To connect to a Macintosh computer
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
x Connecting video equipment using the
VIDEO 1 jacks
If you intend to connect video equipment that has component
video output jacks, such as a DVD player, follow the instructions
below.
Using a video signal cable (not supplied) and an audio
cord (not supplied), connect the video equipment to the
display’s VIDEO 1 jacks.
to the HD15
input
audio cord (supplied)
to the audio output
of the computer
to the
audio input
for PC 2
IBM PC/AT
or compatible
computer
HD15-HD15 video
signal cable (analog
RGB) (supplied)
to the computer’s HD15
output connector (analog
RGB)
Macintosh
audio cord
(supplied)
HD15-HD15
video signal
cable (analog
RGB)
(supplied)
to the audio output
of the computer
to the computer’s
output connector
to the HD15
input
to the
audio input
for PC 2
Y
P
B
P
R
component
video cable
(not supplied)
audio-L
(white)
audio-R
(red)
audio cord (not
supplied)
DVD player
rear of the display