Airlink101 AIC250W User Manual
Page 13
Advertising
![background image](/manuals/44477/13/background.png)
13
Step 11
If you need to change the Camera’s IP Address because another network
device is already using the same address, you can assign a new address here and click
Next.
Step 12
Enter the Network Name (SSID) of your access point / wireless router in the
SSID field and select the encryption setting of your wireless network (None / WEP /
WPA-PSK) from the Security Mode drop-down menu and click Next.
Note: If you do not have wireless encryption enabled, you may skip to
Step 14
.
Advertising