Selecting a flash mode – Sony DSC-U60 User Manual

Page 25

Advertising
background image

25

S

hoo

ting st

ill

im

ages

,

Select [ON] with the control
button

v

, then press EXEC.

When you press MENU, the menu
disappears and the

(self-timer) indicator

appears on the LCD screen.

When placing the camera in a standing
position, make sure the LCD screen is level.

,

Center the subject in the LCD
screen and press the shutter
button fully down.

The self-timer lamp flashes red and a
continuous beep sounds. The image will be
shot after approximately 10 seconds.

To cancel the self-timer in the middle
of the operation

Press POWER to turn off the power.

If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.

3

SELFTIMER

O N

O F F

2.0M

2.0M

10

101

2.0M

EXEC

4

2.0M

2.0M

10

101

2.0M

Self-timer lamp

Selecting a flash mode

,

Set the mode switch to

, and

press the control button

v

( )

repeatedly to select a flash
mode.

Each time you press v ( ), the indicator
changes as follows.

No indicator (Auto):

Based on the

lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly.

(Red-eye reduction):

Flash mode is

set to Auto, and the red-eye reduction
operates if the flash strobes.

(Forced flash):

The flash strobes

regardless of the surrounding brightness.

(No flash):

The flash does not strobe.

2.0M

2.0M

10

101

2.0M

Advertising