Sony DSX-S210X - Manual (Page 23)

23
Searching for a track
Searching a track by name
— Quick-BrowZer™
You can search for a track in a USB device easily
by category.
1
Press (BROWSE).
The unit enters the Quick-BrowZer mode,
and the list of search categories appears.
2
Rotate the multi-way encoder to select
the desired search category, then
press it to confirm.
3
Repeat step 2 until the desired track is
selected.
Playback starts.
To return to the previous display
Press
(BACK).
To exit the Quick-BrowZer mode
Press
(BROWSE).
Note
When entering the Quick-BrowZer mode, the repeat/
shuffle setting is canceled.
Searching by skip items
— Jump mode
When many items are in a category, you can
search the desired item quickly.
1
Push the multi-way encoder right in
Quick-BrowZer mode.
The following display appears.
A Current item number
B Total item number in the current layer
C Item name
Then the item name will appear.
2
Rotate the multi-way encoder until the
desired item or one near the desired
item appears.
It skips in steps of 10% of the total item
number.
3
Press the multi-way encoder.
The display returns to the Quick-BrowZer
mode and the selected item appears.
4
Push the multi-way encoder up/down
to select the desired item, then press
it.
Playback starts if the selected item is a track.
To cancel Jump mode
Press (BACK) or push the multi-way encoder
left. A list of the search categories appears.
Searching by alphabetical order
— Alphabet search
When an iPod or USB device containing song
information is connected to the unit, you can
search for a desired item by alphabetical order.
While this unit is reading song information, “
”
appears on the display. You can use the Alphabet
search function when “
” disappears. For a
USB device, the maximum number of searchable
files (tracks) is 5,000.
1
Push the multi-way encoder right in
Quick-BrowZer mode.
An alphabet list appears.
2
Rotate the multi-way encoder to select
the first letter of the desired item, then
press it.
A list of items in the selected category
appears in alphabetical order.
If there is no song beginning with the desired
letter, “Not Found” appears.
3
Push the multi-way encoder up/down
to select the desired item, then press
it.
Playback starts if the selected item is a track.
To cancel Alphabet search
Press (BACK) or push the multi-way encoder
left. A list of the search categories appears.
Notes
• For a USB device, it may take time to read song
information after connecting to the unit.
While reading song information, “
” appears in the
top left of the display.
• Only the song information of the USB device last
connected can be stored.
• If replacing the car battery, changing connections or
resetting the unit, the stored song information will be
erased.