Sony DSC-TX30 User Manual
Page 113
Effects of lighting conditions
The apparent color of the subject is affected by the lighting conditions.
The color tones are adjusted automatically, but you can adjust color tones manually using the White
Balance function.
Daylight (White as Standard)
Cloudy (Bluish)
Fluorescent (Green-tinged)
Incandescent (Reddish)
To capture the basic white color in One Push Set mode
1. Frame a white object such as a piece of paper filling the screen under the same lighting conditions
as you will shoot the subject.
2. MENU
(White Balance)
[One Push]
3. Touch
(One Push Set)
[OK].
The screen momentarily turns black, and when the white balance has been adjusted and stored in
the memory, the recording screen is displayed again.
Notes
If the
indicator flashes while shooting, the white balance cannot be set. Use automatic white
balance.
Do not shake or strike the camera while [One Push Set] is in progress.
When flash mode is set to other than [Auto] or [Off], the white balance is adjusted to the condition
with the flash emitting.
Related Topic
113