Sony DCR-TRV480 - Manual (Page 36)

Recording 36
3
Slide the POWER switch until the
CAMERA-TAPE lamp lights up.
4
Press EASY.
The EASY lights up in blue.
5
Press REC START/STOP.
Recording starts. [REC] appears on the
LCD screen and the Camera recording lamp
lights up. Press REC START/STOP again
to stop recording.
To turn the power off
Slide the POWER switch up to the (CHG) OFF
position.
To cancel Easy Handycam operation
Press EASY again.
b Notes
• You cannot turn Easy Handycam operation on or off
during:
– Recording
– USB Streaming
• During Easy Handycam operation, BACK LIGHT
(p. 37) is not available.
• During Easy Handycam operation, the settings of the
functions that are not displayed on the screen return
to their defaults. Previously made settings are
restored when you cancel Easy Handycam
operation.
Recording a still image
1
Remove the lens cap. Pull the lens cap
string down and attach it to the grip
belt.
2
Press OPEN and open the LCD panel.
3
Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
4
Press EASY.
The EASY lights up in blue.
5
Press and hold PHOTO lightly to
adjust focus, then press fully.
A shutter sound is heard. When bars of
disappear, the image is recorded on
the “Memory Stick.”
To turn the power off
Slide the POWER switch up to the (CHG) OFF
position.
To cancel Easy Handycam operation
Press EASY again.
b Notes
• You cannot turn Easy Handycam operation on or off
during recording.
• During Easy Handycam operation, BACK LIGHT
(p. 37) is not available.
Slide the POWER
switch while
pressing the green
button.
Easy Handycam
operation
ON
Slide the POWER
switch while
pressing the green
button.