Sony DSC-V3 - Manual (Page 90)

90
Direct printing
Even if you do not have a computer,
you can easily print images shot using
your camera by connecting the camera
to a PictBridge compliant printer. For
preparation, you only set the USB
connection in the SET UP settings and
connect the camera to the printer with the
USB cable.
Using a PictBridge compliant printer easily
prints the index print*.
* An index print function may not be provided
depending on a printer.
• Using the AC Adaptor is recommended to
prevent the power from turning off partway
through printing.
• You cannot print movies and images recorded
in RAW mode.
• When printing uncompressed (TIFF) images,
only their corresponding JPEG files are
printed.
• When an error notifi cation is received from
the connected printer, the indicator fl ashes
for approximately fi ve seconds. Check the
connected printer.
• Note that printing may be canceled if you
switch the /CF switch while printing
images.
Single print
Index print
• If you arrange the same image side by side,
select [This image] in single-image mode, then
set [Index] to [On] (page 92).
• The number of images printed on a single
index print differs according to the printer.
Preparing the camera
Set the USB mode on the camera to
connect the camera with a printer.
Mode dial
Control button
 Set the mode dial to SET UP.
 Select
2
(Setup 2) with
,
then select [USB Connect]
with
//.
 Select [PictBridge] with /,
then press .
Setup 2
Video Out:
Clock Set:
File Number:
USB Connect:
PictBridge
Normal
PTP
2
1
1
2
The USB mode is set.