My pointing device does not work properly – Sony PCG-C1VN User Manual

Page 107

Advertising
background image

VAIO® C1 PictureBook™ Notebook User Guide

106

❑

If you are using an optional Sony USB mouse PCGA-UMS1 series, check
that the mouse is plugged into the USB connector.

My pointing device does not work properly

❑

You may have disabled the pointing device without a mouse being connected
to the notebook. You must restart the notebook to make the pointing device
work again.

❑

If your pointing device is interpreting a single tap as a double-click, you
must adjust the button assignments. Follow these steps:

1

Click Start, point to Control Panel, and then click on the Mouse icon.

2

Change the button assignments in the Mouse Properties dialog box.
(One of the buttons is assigned to the double-click action.)

The pointer does not move (while using the pointing device or mouse)

❑

Click the Start button on the Windows taskbar, and select Shut Down to
display the Shut Down Windows dialog box, then press Enter.

❑

If you cannot turn off your notebook as described in the step above, press
Ctrl+Alt+Delete to restart the notebook.

❑

If you cannot restart your notebook as described in the step above, press and
hold the power button for more than four seconds to turn off the notebook.

❑

If the pointer does not move while playing a disc, press Ctrl+Alt+Delete to
stop playback and restart the notebook.

Troubleshooting drives, PC cards and peripheral devices

My floppy disk drive icon doesn’t appear even though it is connected

❑

Click Start, point to Settings, point to Control panel, and then click System

The System Properties dialog box appears.

❑

Click the Device Manager tab.

❑

Double-click Floppy Disk Controller and then click Standard Floppy Disk
Controller.

❑

Click Delete. The Confirmation window will appear.

❑

Verify that Delete From All Settings is selected and press OK.

❑

Click Update in the System Properties window.

Advertising