Inserting a battery – Sony PCG-Z1AP3 User Manual
Page 7
Inserting a battery
To insert a battery
1.
Turn the computer over, and slide the LOCK/UNLOCK latch on the bottom of the computer to the UNLOCK
position.
2.
Align the grooves and tabs on the battery with those on the back of the computer.
Inserting a Battery
3.
Slide the battery into the computer until it clicks into place.
4.
Slide the LOCK/UNLOCK latch into the LOCK position.
If a port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the
computer with a port replicator attached could cause a temporary loss of power.
Some programs and peripheral devices prevent the system from automatically entering Hibernate mode. If you
are using battery power, save your data frequently to avoid data loss and manually activate a power saving
mode. See
Page 7