Sony SDM-P82 - Manual (Page 2)

Step 2:
Set the computer to the proper resolution settings by opening the
Display Properties window by following the steps and pictures below:
1) Right-click the mouse over the
desktop and select : Properties.
2) The Display Properties window
opens.
3) Select the “Settings” tab.*
4) Slide the “Screen Area” bar to
display 1280
×
1024.
5) Choose the desired number of
colors.
6) Click OK.
* If the “Settings” tub is not available in NT, 2000 or XP versions, please refer to your operating system User manual or your IS department.
Step 3:
The first time you turn on your monitor, it performs several types of
automatic adjustments to optimize image quality. If the image quality
is not optimum for analog input signal (VGA or HD15), you can manu-
ally adjust PITCH and PHASE to fine tune the monitor by following
the instructions below:
Tip
You do not need manual adjustment for a digital input signal.
To Maximize the Performance of your LCD
1) Pitch and Phase should ONLY be adjusted after a 15 minute warm-up period.
2) There are two ways to optimize the screen performance.
2a) To use the auto adjust:
Press the “MENU” button and using the down arrow to scroll to “Screen”, then
press the “OK” button. Select the “AUTO” button and press “OK”. This will perform
an auto adjust of Pitch and Phase.
(For SDM-X72 and SDM-X82) Once the auto adjust is completed, press the
“MENU” button.
(For SDM-P82) Press the “AUTO” button. This will perform an auto adjust of Pitch
and Phase.
OR
2b) Insert the supplied Utility CD-ROM, open the folder named “/Display_Adjust for
Windows”, then run the file named “Display_Adjust for Windows verx.x.exe”.
Once the file is launched, follow the short step-by-step instruction to maximize
the performance of your display.
For additional support, go to www.sony.com/displays/support or call 866-357-7669 (SONY)
1 2
3
4
5
6