Sony PEG-NZ90 - Manual (Page 25)

25
Performing the initial
settings
4
Following the on-screen instruction, tap the center of the
displayed mark.
Note
If the digitizer is not configured correctly, the
scroll bar may not operate properly, “tapping”
may not work as expected, or other problems
may occur. For re-configuring the digitizer, refer
to “Customizing your Sony CLIÉ handheld
(Preferences): Adjusting the digitizer” in the
“Handbook.”
After calibration is completed, a screen for setting the time and date
appears.
5
Tap the Set Time box.
The Set Time screen is displayed.
Tip
You can reconfigure the date and time settings in the
Preferences screen.
b
For details, refer to “Setting the Date & Time
preferences” in the “Handbook.”
6
Tap the arrow v or V to set the current time.
Tap each box to set the current
hour and minute.
7
Tap OK .
The current time is set and the
Setup screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •