Sony DSC-U10 - Manual (Page 69)

69
Co
py
in
g im
a
g
e
s
“USB MODE: NORMAL ” appears on the LCD screen.
When a USB connection is established for the first
time, your computer automatically runs the used
program to recognize your camera. Wait for a while.
• If “USB MODE: NORMAL” is not shown in step 3,
confirm that [USB] is set to [NORMAL] in [
] (page 89).
• In USB mode, the POWER button, lens cover and other
controls on the camera do not function.
3
USB MODE:NORMAL
Disconnecting the USB cable from
your computer or removing the
“Memory Stick” from your camera
during USB connection
For Windows 2000, Me, or XP users
1 Double-click on the tasktray.
2 Click (Sony DSC), then click [Stop].
3 Confirm the device on the confirmation screen,
then click [OK].
4 Click [OK].
This step is unnecessary for Windows XP users.
5 Disconnect the USB cable or remove the
“Memory Stick.”
For Windows 98 or 98SE users
Do only step 5 above.
When the access lamp is lit up, it means that
image data is being read or written. Never
remove the “Memory Stick” or disconnect the
USB cable at this time, as the data may be
damaged.