Sony KLV-21SR2 - Manual (Page 15)

15
Installing and Connecting the TV
When using your audio system speakers
Set “Speaker” to “Off” in the (Audio) menu. The TV’s sound is not
output from the AUDIO OUT jacks when the TV’s speaker is set to on.
You can still control the volume output from your audio system using the
TV’s remote control, by setting “Audio Out” in the
(Audio) menu to
“Variable.”
If you want to adjust the volume through your audio system, set “Audio Out”
to “Fixed.”
Notes
• The video signal is not output through the AUDIO OUT jacks.
• When “Audio Out” in the
(Audio) menu is set to “Variable,” “Speaker” is to “Off,”
check if the speaker volume is moderate before switching “Speaker” from “Off” to “On.”
Otherwise, the speaker volume may get too loud.
Connecting an Audio Receiver
Disconnect all power sources before making any connections.
Using an AUDIO cable, connect the TV’s AUDIO OUT jacks to the audio
receiver’s AUDIO IN jacks.
AUDIO cable
(not supplied)
Rear of TV
Audio
input
Audio reciever
(Compact AV system
DAV-FC9, etc)
AUDIO-R (red)
AUDIO-L (white)