Sony PCG-R505ELP - Manual (Page 38)

Communicating without Access Point (ad-hoc)
An ad-hoc network is one in which a local network is created only by the wireless devices themselves, with no other central
controller or Access Point. Each device communicates directly with other devices in the network. You can set up an ad-hoc
network easily at home.
To communicate without an Access Point:
1. Open the computer and move the Wireless LAN switch on the right to ON. The Wireless LAN indicator to the left
of the switch lights up.
2. Click Start on the Windows taskbar, and then Control Panel.
3. Click Network and Internet Connections, and then Network Connections.
4. Right-click the Wireless Network Connection icon and select Properties.
5. Select the Wireless Networks tab.
6. Click Add. The Wireless Network Properties dialog box appears.
Setting Wireless Network Connection Properties
7. Type a six-digit name in the Network name (SSID) box.
8. Click the Data encryption (WEP enabled) check box to select it.
9. Click the Network Authentication (Shared mode) check box to select it.
10. Click the "The key is provided for me automatically" check box to deselect it. Some information boxes become
visible.
11. Type a five-digit name in the Network key box.
12. Click OK. Your new Network name appears in the Preferred networks window.
13. Click Advanced. The Advanced dialog box opens.
14. Select the Computer-to-computer (ad hoc) networks only option.
15. Click Close.
Page 38